Portable Air Conditioners. US
|
 |
 |
 |
 |
 |
 |
 |
| THE source
for Portable Air Conditioners! Portable Air Conditioners. US
|
PORTABLE
AIR CONDITIONER
|
|
Soleus Portable Air Conditioner, Heat Pump Heater, Dehumidifier, Fan, & HEPA Air Purifier :: 12,000 BTU Single Hose The Soleus Air PA1-12R-32 combines 5 products into 1 easy to use portable appliance. Cool, heat, or clean multiple rooms with the Soleus Air 12,000 BTU portable heat pump with HEPA air purifier. This energy efficient multi-season unit utilizes heat pump technology to harvest heat from the air while producing more heat and consuming less energy than other portable heater technologies. The built in HEPA air purifier removes 99.97% microns from the air. Our unique evaporative technology increases efficiency and reduces the need to drain condensate. Along with powerful heating and cooling power, this unit features a 65 pint evaporative dehumidifier eliminating the need to empty a water bucket. Heavy-duty casters allow the unit to be easily rolled almost anywhere. Shipping is freight, and
is a flat rate of $45 to anywhere in the 48 continental United States! |
|
FEATURES
|
TECHNICAL SPECIFICATIONS
|
|
|
|
Installing the venting kit for single hose portable air conditioners The Venting kit must be installed in order for the unit to work correctly in the air conditioning mode. The venting kit should not be used while the unit is heating or fanning. The window kit has been designed to fit into most vertical and horizontal window opernings and can also be used in a sliding door. |
 |
Choose a suitable location, near a grounded electrical outlet and a suitable window or door. Remove packaging and locate the components (a) |
 |
Slide the exhaust connector over the dishcharge opening at the back of the unit (b). |
 |
Connect the exhaust hose to the exhaust connector, aligning the fitted grove (c). |
 |
Open the window or door and adjust the length of the window kit to fit the opening (d) |
 
|
If necessary, mark the kit and cut one end down to properly fit the opening (e & f). |
 |
Attach the window kit adaptor to the window kit (g) |
  |
Place the window kit back into the window and attach the exhaust hose to the window kit adapter (h & i). |
 |
Your portable air conditioner is now ready to cool! |
|
|
|
Note : When using
the venting system, keep the exhaust hose as straight as possible. The
exhaust hose can be shortened, but it is not recommended to increase the
length of the exhaust hose. Do not use an extension cord with your new
portable air conditioner.
HOME | ABOUT US | WARRANTIES | PRIVACY | SHIPPING | CONTACT INFO | LINKS | SITE MAP All images copyright
2004-2010 Genius Goods, Inc., Danby, Sunpentown, Soleus, Delonghi, G.E.,
MobilAir, Fujitronic, |
